|
|
|
#3
01-26-2009, 08:11 PM
|
|||
|
|||
|
Lots of good info there, for sure. However that looks like a different problem, my 2.7ohm 15W is OK and the rectifier diodes are bad. I'm wondering of perhaps the 200v 680uf went bad and took out the parts in front of it. I don't have a lot of time to spend on this right now but if the problems are in the linear section before the switching stage then I might be able to handle it.
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode