Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 01-26-2009, 04:35 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
The coil is not housed in anything. It's a small round ferrite rod with several turns of wire wrapped around it. It's located behind the HOT heatsink. That coil can look like it's soldered OK but still not make good connection.

You can clip your negative meter lead to the tuner shield, vert. output heatsink, etc. Don't clip it to the heatsink with the power supply switching regulator on it. This is hot ground and will give you false readings. Set your meter to read at least 200 VDC and check the voltage at the collector of the HOT. If you get at least 120 volts or so but no HV; you've either got loose connections or a loss of horizontal drive. Loss of horizontal drive can be caused by, but not limited to, a defective horizontal driver transistor, a defective horizontal drive transformer, or the jungle IC. No B+ will indicate a power supply fault.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:22 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.