Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 12-14-2004, 03:30 PM
bgadow's Avatar
bgadow bgadow is offline
VideoKarma Member
 
Join Date: Oct 2003
Location: Federalsburg, MD
Posts: 5,865
FYI, the arcing occurs the instant power is turned on. Odd, I have a switched socket with (plugs into the wall, tv plugs into it, cord about 6' with a switch on the end) so I used that so I could kneel down & be looking straight at it when I flipped the switch. With cord switch off, I turned on the tv switch, it started arcing! But no AC? Or miswired cord? Light bulb plugged in same way didn't light! I want to ignore that odd problem for now! I'll rig up another such way to flip it on while I'm kneeling. It will scare the devil out of me when I turn it on, even though I know what is going to happen, but gotta do it! I don't see any signs of the arcing, though-no carbon or burnt spots. It will be a night or two before I can work on it again, think I'll try cleaning the traces good both top & bottom. There are spark gaps connected between the screen control shell & chassis ground, I suppose so that in the event of a short that shell doesn't go live with 800-1000 volts. I'll also see if I can get a look into the HV cage while this is going down.
__________________
Bryan
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:09 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.