![]() |
|
#13
|
||||
|
||||
|
Quote:
Jim, what I use to clean are usually compressed air first but not this time. the set wasn't real bad inside and it's cold outside, this time I used my micro tools for the shop vac first. Then I get a quarter of a microfiber cloth wet with some dawn dish soap. That way I can get roughly 5"x5" sections clean and dry with the same cloth. I clean tubes carefully and go around the writing. The cabinet was cleaned with another cloth and some CRT cleaner that I have, It brought the paint back to like new. The next thing on the list is after the digital switch, I am going to restuff the cans. There is a slow crawl in the picture and that 47uF cap was never meant to be a permanent fix. He told me it was in there when I got it. Doug don't like to tack wires on to a cap like that We had discussion of our dislike for that kind of repair that day. A lot of my sets are getting cans restuffed after the switch. For one, a lot of them need it and two, I've got a system going and its kinda fun. But for now, I want as many sets "working" as possible before the digital switch.
__________________
My TV page and YouTube channel Kyocera R-661, Yamaha RX-V2200 National Panasonic SA-5800 Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20 Pioneer SX-939, ER-420, SM-B201 Motorola SK77W-2Z tube console McIntosh MC2205, C26 |
| Thread Tools | |
| Display Modes | |
|
|