Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-24-2008, 11:46 PM
jfh2112 jfh2112 is offline
AK Member
 
Join Date: Dec 2008
Location: Summit, MS
Posts: 16
I'm not dead! Yay!

Replaced the flyback. Now here's what I get.

Plug in the TV. Red light on logic board. Power button light comes on green, flashes 10 times, goes off. I turn on the TV, it sounds like it's going to power up, but still no picture. I'm guessing - literally - that either I have a bad HV splitter, or my connection from the flyback to the HV splitter is bad. Which is entirely possible, since when I was trying to disconnect the old flyback from the splitter, when I pulled the wire out I just got a stripped end instead of a crimped-on connector. Oops?

I shined some light up in it to see if there was a connector jammed in there, but I didn't see anything - just looks like a small hole. Did I break something?

Oh, and Merry Christmas.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.