Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-21-2008, 07:02 PM
Kiwick's Avatar
Kiwick Kiwick is offline
slave to 3 equines
 
Join Date: Mar 2007
Location: Italy
Posts: 448
Quote:
Originally Posted by Dave S View Post
I'm all in favor of being safe - and of not having my face cut to ribbons by shards of flying glass - but I suspect you may be overestimating the force of an implosion. Also not a very likely occurrence. I'm going to guess that although safety glass or lexan would be the best choice, nearly any old piece of glass would likely contain the debris from an implosion of a 10" tube. This would be a good project for "Mythbusters" (or an adventurous AK person who likes to blow stuff up) to test out!

--Dave
Each implosion is a story of its own, sometimes all the glass will just be sucked into a heap inside the set but but sometimes it's ejected with extreme violence and in the worst case scenario the neck/electron gun assembly will be propelled towards the screen at very high speeds and if this happens you need something really tough to stop it.

Keep in mind that plain glass may be smashed by the implosion's shockwave even before the glass shards start to scatter outward

also, some early B/W CRTs are made of thin, weak glass and are prone to spontaneous implosion.
Reply With Quote
  #2  
Old 01-19-2010, 05:22 AM
yagosaga's Avatar
yagosaga yagosaga is offline
VK Member
 
Join Date: Jan 2005
Location: in Braunschweig
Posts: 690
Hello,

in the last days, I have picked the GE 806 tv set which was waiting for repair since months.

In the mains unit, one 5 Ohm resistor before the rectifiers was burned, I replaced it. The 19BG6 was also weak, I replaced it. One wax capacitor was leaky, I unsoldered one end and added a new one. After that, I reformed the electrolytics and switchet the set on. It showed a dim raster. Sound it working well.

The original 10BP4 was very weak and came with a brightener. I have rejuvenated the CRT and removed the brightener. Currently I am working with the bad picture tube, but when works are done, I want to replace it. I have got a good 10BP4 (0.4 ma) and a good 10FP4 (0.9 ma). Which picure tube might be the better selection for replacing?

Kind regards,
Eckhard
Attached Images
File Type: jpg GE_806_01.jpg (99.1 KB, 27 views)
File Type: jpg GE_806_02.jpg (94.3 KB, 27 views)
File Type: jpg GE_806_03.jpg (77.7 KB, 35 views)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.