Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-20-2008, 07:02 PM
Electrohome Electrohome is offline
VideoKarma Member
 
Join Date: May 2008
Posts: 155
Smile Arcade Cabinet types seen at the Arcade

Hello, I never knew Electohome also made monitors for arcade cabinets as well. Arcade cabinets are the game consoles you see at the arcades and they come in the following configurations-
Stand-Up cabinet-this is the classical-style cabinet that the player
stands up at to play the host game
**very common and well remebered at many arcades**
Table/Cocktail cabinet-the player sits down to play the host game with table
top controls and the monitor is built into the table.
**also, 2-player versions of this cabinet as well for
2 players**
Sit-Down cabinet-this is the upright cabinet provided with a seat for the
to sit down for many hours of play of the host game
Specialized cabinets-arcade cabinets with specialized controls-ie: a car racing
game with a seat and simulated car controls for
an almost authentic expercience for the player
is one example of such a cabinet.
Host game-this is the video game that the arcade cabinet was designed for/video game that's currently in that particular cabinet.
Yep, Electrohome also made Vector-type monitors too for arcade cabinets.
VideoPower, it's the 1980's again-Totally Warp Dude
Reply With Quote
  #2  
Old 12-21-2008, 12:24 AM
colorfixer's Avatar
colorfixer colorfixer is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 349
Electrohome arcade monitors

Electrohome color monitors were a favorite of Midway. Many of their games, such as Pacman, Tron, Satan's Hollow, etc. all had these monitors.

They'd use whatever manufacturer that could supply both the lowest cost, and at the height of the video game boom, stock at the right time. Electrohome, along with Wells Gardner (which I'd swear used Toshiba boards) were the suppliers of choice.

Take a close look at a "GO7" circuit board, and you will see a circular JVC logo screened on the board.

I always found it interesting that Electrohome frequently used RCA 19VJTP22 tubes on these monitors, and many JVC 19" tvs I've ran across, assembled in north america also had these tubes.

The monochrome vector monitors were actually a contract build for Atari and Electrohome's only color vector monitor, the G08 was built for Sega.

Quote:
Originally Posted by Electrohome View Post
Hello, I never knew Electohome also made monitors for arcade cabinets as well. Arcade cabinets are the game consoles you see at the arcades and they come in the following configurations-
Stand-Up cabinet-this is the classical-style cabinet that the player
stands up at to play the host game
**very common and well remebered at many arcades**
Table/Cocktail cabinet-the player sits down to play the host game with table
top controls and the monitor is built into the table.
**also, 2-player versions of this cabinet as well for
2 players**
Sit-Down cabinet-this is the upright cabinet provided with a seat for the
to sit down for many hours of play of the host game
Specialized cabinets-arcade cabinets with specialized controls-ie: a car racing
game with a seat and simulated car controls for
an almost authentic expercience for the player
is one example of such a cabinet.
Host game-this is the video game that the arcade cabinet was designed for/video game that's currently in that particular cabinet.
Yep, Electrohome also made Vector-type monitors too for arcade cabinets.
VideoPower, it's the 1980's again-Totally Warp Dude
Reply With Quote
  #3  
Old 12-21-2008, 02:40 AM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
Hey, colorfixer. There are some really nice G08 videos and articles floating around the 'net. Vector monitors have always been very interesting to me.

I've seen a load of old arcade games like Midway, Capcom, etc... which were using RCA 19VJTP22s as well as Ehome or WG-branded JTP22s which definitely may have been RCA. These things were run hard, for long periods of time. Most arcades I've been to in the past 20 years had at the very least, one or two older games with this type of monitor which still worked. It wasn't very long ago that these tubes were plentiful and every TV shop on the corner could come down to swap the tube. Panasonic TVs seemed to use them a lot in the 1980-1984 time frame.
Reply With Quote
  #4  
Old 12-21-2008, 02:30 PM
colorfixer's Avatar
colorfixer colorfixer is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 349
Yah, I remember those days, when a simple 19" CRT was easily had. Nowadays, they're like unobtainium. I have some RCA tubes in my games that are nearing 30 years old, and although the screens are burned to hell, recapping the monitor board cleans dim picture and focus issues that you'd think were down to a weak tube.

I'd be interested to see if anyone has sucessfully subbed a chinese tube into an older monitor with good convergence/purity.

I remember the days when Panasonic quietly went to RCA tubes in their 26 inch "component" TV's. The first was a silver round corner monitor/tv with OSD from about 81-82 that was the rage around the time when Sony sold the profeel.

I've tried using tubes from orion and chungwa built sets that seem to mount well and will light up, but with the yoke from the G07 (or WG49K) they just won't converge or run with proper purity. Using the yoke from the tv, you just get really bad pincushioning.

The G08 was a monster. The design criterion simply was to avoid Atari's patents (and lawyers) on the spot killer circuit at all costs. By doing this, they over-engineered the thing to the point where it was made to self destruct, especially if there were any grounding issues between the components of the game. Stories of the monitor going to flame were no exaggerations.
Reply With Quote
  #5  
Old 12-23-2008, 10:20 PM
gravitar gravitar is offline
AK Member
 
Join Date: Oct 2008
Posts: 10
Quote:
Originally Posted by zenith2134 View Post
Hey, colorfixer. There are some really nice G08 videos and articles floating around the 'net. Vector monitors have always been very interesting to me.

I've seen a load of old arcade games like Midway, Capcom, etc... which were using RCA 19VJTP22s as well as Ehome or WG-branded JTP22s which definitely may have been RCA. These things were run hard, for long periods of time. Most arcades I've been to in the past 20 years had at the very least, one or two older games with this type of monitor which still worked. It wasn't very long ago that these tubes were plentiful and every TV shop on the corner could come down to swap the tube. Panasonic TVs seemed to use them a lot in the 1980-1984 time frame.
And those RCA tubes were the absolute WORST for arcade games.. 10 minutes in attract mode and the tube's marked for life!
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:49 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.