![]() |
|
|
|
#1
|
||||
|
||||
|
As for the art work, I would place the old part on a large flat bed scanner at Kinkos. Then i would have it printed in full color on a color printer onto clear acetate film and sandwich it between two pieces of thin glass cut to the exact shape and dimensions as the original glass.
The other alternative if you are willing to spend the moeny, is to take the newly cut glass to a silk screener along with the old part. A silk screener can photo the old art work on the old glass and print it on the new glass in multiple colors. This would cost about $75 per color, so I would vote for the Kinkos method because the value of the set is not that great. Good Luck!
__________________
Vacuum tubes are used in Wisconsin to help heat your house. New Web Site under developement ME http://AntiqueTvGuy.com |
|
#2
|
||||
|
||||
|
Once, I took a radio panel into Kinko's for scanning. They refused to let me put it on their scanner bed. Nothing allowed there but paper or equivalent. Risk of scratching the glass, I suppose.
Phil |
|
#3
|
||||
|
||||
|
Hi folks,
I will probably have somebody who is willing to make a replica of the front glass. The tv set is General Electric model 806. Is somebody here interested in getting a replica, too? It might be cheaper for us all to produce some more front glasses than only a unique replica. Kind regards, Eckhard |
|
#4
|
||||
|
||||
|
Does this look like the same cabinet and glass as your 806 set? The tube diagram inside is marked model C2505 or C2506. The CRT was a 10BP4.
If so, you can have both pieces or just the glass for postage from zip 19390. They are from a parted out set. The green back paint is chipped away near the top as shown but the glass is not broken. Cliff |
![]() |
| Thread Tools | |
| Display Modes | |
|
|