Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 12-09-2008, 06:18 PM
Don Lindsly Don Lindsly is offline
Ex-Philco
 
Join Date: Jul 2005
Location: Colorado
Posts: 450
That is a "hot" chassis. One side is connected to the AC. For shock protection and safety, use an isolation transformer. If you don't have one, make sure the set is connected with the chassis on AC neutral. Measure from chassis to power line ground and look for zero AC voltage. If you measure 120 VAC, reverse the plug.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:35 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.