![]() |
|
#3
|
|||
|
|||
|
I am helping out a friend trying to get this up and running . Its a model 22BU4302. Have not found a chassis number yet . It has a 21zp4a picture tube . Here is the tube layout in this set .
12b4a (vertical output) 12au7 (vertical osc) 6al5 (phase comp) 12au7 (horz osc) 6bq6gt (horz output) 1b3gt (hv rectifier) 6ax4 (damper) 6cb6 (if amp) 6x8 (osc mix ) 6bz7 ((rf amp) 6au6 (video amp) 6v6gt (aud) 6t8 (agc/fm det) 6cs6 (sync sep) 6aq5 I am trying to obtain a schematic however have not found one yet . Found the horizontal output tube bad , replaced that as well as the damper and rectifier . Powered it up breifly on my variac and had high voltage and sound , however i had just a white horizontal line across the screen . Then replaced the electrolytics ,wax caps and bumble bee caps . I used orange drops there . I only worked on the chassis on right side which is the vertical, horizontal and high voltage . Put the chassis back in and got the same issue . Checked the pots(vertical height and lin, which were definitly dirty, sprayed them with some de-oxit and then they seemed to read ok in circuit . Still have same issue except the horizontal line opens up a but more when height is set to max . Seems to be a straight forward set, however my next step is obtaining a shematic and i guess check all resisters , then go from there . Can anyone chime in and give me any advice . thanks Mike |
| Thread Tools | |
| Display Modes | |
|
|