Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 12-08-2008, 08:56 AM
radotvguy radotvguy is offline
mike g
 
Join Date: Jan 2007
Location: colonia,nj
Posts: 316
i just aquiried a philco like the ones previously stated . I did not obtain a schematic yet, will be doing that in the next few days . I replaced the tubes which tested bad , then replaced the bumble bee caps, wax caps and electrolytics as well . The two selenium rectifiers tested good , so for now i will leave them in and eventually changed them . Anyhow after powering it up on the variac , i had great sound, high voltage but only a vertical line on the screen . I sprayed the two vertical pots with cleaner/lube and checked them with a meter but still only get a line which opens up to a inch with controls all the way out . Any one have a idea of where i should check next ???
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:08 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.