Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 12-07-2008, 10:48 PM
mbates14 mbates14 is offline
VideoKarma Member
 
Join Date: Apr 2004
Posts: 1,016
Ive done this before. using old viewfinders and with the same lenses made a mini-CRT projector.

it will work ok, if you use a NTSC Decoder circuit. youll get a R, G, B, and H/V sync. that you can mix together and get the composite sync needed to drive the CRT view finders. BUT on some cases you may need those H/V sync lines depending on the viewfinder. Cliff Benham will be able to clue you in on where to get an NTSC decoder module. (as you need this to make a homebrew color-wheel system).

your next problem is convergence. youll never have convergence unless you design your own circuit. In my case, i used a rather large analog convergence board, and took the H/V sync gate pulses into the board, and outputted this into makeshift coils wrapped around the current yokes.

it worked ok, but you could never get it perfect. (obviously).
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:28 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.