Silvertone was the house brand for Sears-Roebuck electronics up until the late '60's-early '70's. The speaker will be inside the radio behind the cloth grille on the front. You can use a modern speaker as a replacement; but, you may have to do some electrical modifications. Most radio speakers from this vintage had a field coil instead of a permanent magnet. The field coil serves double duty as a magnetic field for the speaker as well as a filter choke for the power supply. The feild coil can be replaced by a seperate filter choke or a 10 or 20 watt resistor of the approx. ohmage as the original field coil (can be checked from the schematic). Also, many of these old speakers had the audio output transformer mounted to the speaker. If someone stole the original speaker, they probably got the output transfomer with it. You should be able to get an output transformer (and any other old radio parts) from
www.tubesandmore.com or
www.radiodaze.com. If you know the model number, you can probably find a schematic at
www.nostalgiaair.org.