Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 11-23-2008, 09:41 PM
compucat's Avatar
compucat compucat is offline
1949 Motorola 9VT1
 
Join Date: Apr 2005
Location: Suffolk, VA
Posts: 970
Quote:
Originally Posted by jeyurkon View Post
I have a 9T1 that I recently purchased to restore. I've glad to hear that they perform well. One section of the ballast is burned out so I decided to rebuild it the hard way.

After a bit of research I'm guessing the alloy of the wire is 70% Ni and 30% Fe. It has the right temperature coefficient and seems to match the resistance of the wire in the ballast. So, I ordered some 37 qauge MWS-120. Buying it from MWS was a mistake in terms of cost. The Next time I will order it from resistancewire.com

I don't think it'll be too difficult. From reading past posts I noticed that your ballast burned out in 2007 or earlier. If my rebuilding is successful, and you're not in a hurry, I'd be happy to try to rebuild yours. If it's not a JFD brand ballast I might need to know more about it before agreeing to try it.

Why rebuild a ballast this way? Probably for the same reason I want to restore a set. That I can't explain either.

I'll be awhile before I can get the set running as you can see from the attached photo. It didn't exactly arrive in good condition.

I tried to test the 8BP4 using my B&K 465. I made an adapter for it. The tube doesn't show any shorts, but the emission is near zero. I'm not sure whether to believe the reading or not. It might need much higher bias than the 465 can supply. I realize that the tester won't find other problems like bent deflection plates. Has anyone had sucess trying to measure the emission of this CRT?

John Y.
I dont know who made the ballast in my set but I can tell you that only one element is actually burned out. It is the one in the b+ line. The tube filaments still light up.
__________________
Just look at those channels whiz on by. - Fred Sanford
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.