Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-07-2008, 02:26 PM
Kiwick's Avatar
Kiwick Kiwick is offline
slave to 3 equines
 
Join Date: Mar 2007
Location: Italy
Posts: 448
Definitely not a problem with bad connections as the vertical also collapses when i unplug the antenna lead from the wall socket, it does this for about a second or so then it comes back with a stretched raster that returns to normal dimensions within a couple of seconds.

The focus and contrast has improved a lot with use! now it's almost perfect!
Reply With Quote
  #2  
Old 11-07-2008, 03:34 PM
Old1625's Avatar
Old1625 Old1625 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Western MA
Posts: 426
The erratic vertical sweep could perhaps be traced to sync stages, if changes in signal seem to cause the problem. Check associated tubes. Check that B+ handling resistors haven't drifted in value. Check blocking caps in the sync circuitry to be sure you don't have a leaker.
Reply With Quote
  #3  
Old 11-08-2008, 03:57 AM
Tubejunke's Avatar
Tubejunke Tubejunke is offline
VideoKarma Member
 
Join Date: Apr 2003
Location: Martinsville, VA
Posts: 1,823
Quote:
Originally Posted by Kiwick View Post
Definitely not a problem with bad connections as the vertical also collapses when i unplug the antenna lead from the wall socket
I am hoping that this means you have cablevision coaxial cable hooked up to this set and not what it sounds like... I'm sure that there would be a lot more collapsing than vertical sweep if the antenna were plugged into a 110 v.a.c. wall socket.

But seriously, the focus and contrast improving with use is no surprise at all. I have found that if you luck out and get an old radio or television to play for more than a few minutes after decades of dormancy, the more you let them play the more bugs work themselves out. I'm fairly certain that this is due to the old capacitors sort of re-forming (rejuvenating) themselves which takes a bit of time.

I have only read a small amount on the subject of whether or not capacitors can even be "re-formed". There is a process to this in which I am sure that there are already threads on, and it goes way beyond simply plugging a set in. It seems to always be debatable whether or not old caps can be used, or more so trusted. As an owner of two TV sets, and quite a few radios over 50 yrs. old with all original (or mostly) caps I can say at least that they CAN last a VERY long time. Most particularly electrolytics....
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.