![]() |
|
|
|
#1
|
|||
|
|||
|
Sorry to bump a thread from the stoneage, but I wanted to see if Devoid is still using this tv and how the repair worked out long term. I just scored a JVC 48WP30 CRT RP HDTV, it wasn't a curbside pickup, but I paid $100 for it. Same problem as you had, it looks like.
I have removed the convergence board, and taken out the two convergence IC's. I bought the parts from a store called servicemanuals.vstore.ca...i'm wondering if they are a good source for the original sanyo IC's or if they're going to be knock off's. I paid $70 for a kit that contained both IC's, about 12 resistors, along with pretty good looking instructions (which was why I paid higher than retail...I know the parts seperately would have cost much less)...but I'm concerned that the IC's that come in the kit they sell might not be the original high quality originals. If you have any information that could help, I would appreciate it. I've also got several discussions going on over at fixya but I thought maybe if you had any thoughts, maybe you could help me out and post them here too. The parts haven't gotten here yet so i'm not committed. If I need to buy new convergence IC's I still can. Thanks, and sorry for bringing this thread back from the dead. |
|
#2
|
||||
|
||||
|
original sanyo,s do not have any writing on the back of the ic,s. if you put generics in there and they short out you stand a good chance of corrupting the convergence dcu module. not a good thing. never use generic stk,s i would put stk392-180 in place of the stk392-110. steve
|
|
#3
|
||||
|
||||
|
if the ic,s have green numbers on the back send them back or throw them in the garbage. steve
|
|
#4
|
||||
|
||||
|
Quote:
![]() ![]()
__________________
From Captain Video, 1/4/2007 "It seems that Italian people are very prone to preserve antique stuff." |
|
#5
|
|||
|
|||
|
Thanks for the replies, I appreciate the tips on what to look for on the IC's.
I had read about potentially replacing them with 150's, 180's or even the newer generation 120's, but other people also said that can sometimes tax other components on the board by drawing different amounts of power, or other things I didn't understand, so I decided to replace like for like. When the IC's get here today I'll take a look at them. I emailed the guy and asked him, and he said they are OEM ICs bought in bulk, so we will see... |
| Audiokarma |
|
#6
|
|||
|
|||
|
Quote:
I had noticed that there were only four dots of thermal grease on the back of the chips, but it didn't look like it had been soldered before other than the original time...did JVC use cheap STK's to start, or has mine been repaired before with cheap parts? |
![]() |
| Thread Tools | |
| Display Modes | |
|
|