Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 10-25-2008, 07:07 AM
Fisherdude's Avatar
Fisherdude Fisherdude is offline
The Golden Age of Hi-Fi
 
Join Date: Jul 2003
Location: Lewiston, ID
Posts: 324
Kind of hard to see if that hole goes deep enough, but it looks like a standard banana plug might work.
__________________
I may be growing older, but I refuse to grow up.
Reply With Quote
  #2  
Old 10-25-2008, 03:13 PM
Robert Grant's Avatar
Robert Grant Robert Grant is offline
VideoKarma Member
 
Join Date: Feb 2008
Location: Monroe County, MI
Posts: 518
I'm thinking a banana plug will be too fat.

I have one of these, only in ivory, I never seen another one of these before. Wy wife listens to it in the kitchen on a regular basis, and I fear the 12AJ7 converter will eventually fail (I have all the others, but the 12AJ7 is a rarity on this side of the Pacific).

You may try kinking a bare wire into a hairpin and tighten the hairpin until it is the right thickness to fit snugly.

One more quirk about the radio - the AM ferrite bar is not mounted parallel to the radio cabinet us one might expect, it is almost (but not quite!) perpendicular to it. As a result, if you wanted to listen to an AM station dead North of you, do not position the radio so it faces North or South as one might expect, it should face ESE or WNW!

Rob
Reply With Quote
  #3  
Old 10-25-2008, 04:08 PM
Fisherdude's Avatar
Fisherdude Fisherdude is offline
The Golden Age of Hi-Fi
 
Join Date: Jul 2003
Location: Lewiston, ID
Posts: 324
Quote:
Originally Posted by Robert Grant View Post
...You may try kinking a bare wire into a hairpin and tighten the hairpin until it is the right thickness to fit snugly....Rob
That's actually my normal method!

Strip enough insulation off to give you some wire to work with, twist it back on itself, and wind it around until it's just the right thickness to fit tightly.

Works great.
__________________
I may be growing older, but I refuse to grow up.
Reply With Quote
  #4  
Old 10-25-2008, 04:16 PM
Sandy G's Avatar
Sandy G Sandy G is offline
Spiteful Old Cuss
 
Join Date: May 2003
Location: Rogersville, Tennessee
Posts: 9,571
Quote:
Originally Posted by Fisherdude View Post
That's actually my normal method!

Strip enough insulation off to give you some wire to work with, twist it back on itself, and wind it around until it's just the right thickness to fit tightly.

Works great.
Works for a lot more than just these...Hate to admit it, but for a long time, I fed my 390As similarly, 'cause they use a somewhat hard-to-find antenna connector. Still use this method for my British RACAL RA-17, it uses another oddball connector that's Unobtanium on this side of th' Pond..
__________________
Benevolent Despot
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:32 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.