![]() |
|
|
|
#1
|
||||
|
||||
|
I used to work for RCA Labs back then, and if I recall correctly, the CTC111 had no A/V jacks, and was a hot chassis design. Using a bridge rectifier on the line, so it's hot no matter which way you plug the power plug. 19 inch set with comb filter.
I had a CTC101, the one with the infamous flyback. ![]() And my CTC115: ![]() My CTC108: ![]() The CTC121 at my mom's:
__________________
|
|
#2
|
|||
|
|||
|
Looks like CTC-121 is the winner here so far. Is there anything better and more rugged than the CTC-121, or is the CTC-121 the best I can get? It has to be made after 1979.
|
|
#3
|
||||
|
||||
|
I realize the world is bigger than this but I just have to ask anyway. Did you know of an RCA distributor called Frank Lyon Co in Kansas City or know of Ron Stout who may have worked in their service dept (and later owned his own company, Video, Etc.)? Ron was very active in RCA service during the mid 80's and quite the tech. I knew OF Ray Cunningham but never met him personally. I worked for Ron's successor in the late '80's. Just wondering...
Brian |
|
#4
|
||||
|
||||
|
No, but we in the labs back then rarely knew of anyone in the rest of the RCA TV operation aside from some people in the Indy design center.
__________________
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|