![]() |
|
|
|
#1
|
||||
|
||||
|
all tubes check good and operate properly in another set.agc adjustment does nothing.found a bad resistor in the video circuit and replaced to no avail.no sound or video unless that 6ka8 is out of the socket.
|
|
#2
|
||||
|
||||
|
I have seen lots of cases of bad connections/bad solder joints in RCA's along with burned wiring...usually results in power supply voltages getting removed from a stage causing trouble. I'd check all the power supply voltage outputs and then check voltages at the tube sockets....sometimes heat from a tube causes cracking at the socket pins and it can be hard to detect the problem.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|