Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 10-01-2008, 09:25 PM
newhallone newhallone is offline
VideoKarma Member
 
Join Date: Jun 2008
Posts: 524
So how do you work on these bigger sets to trouble shoot and do tests and such? I was looking at my 64 roundie Zenith and you would have to have a crap load of extensions so you could put the chassis on the bench. Or can you normally access most test points easily from the topside of the chassis while in the cabinet?
Reply With Quote
  #2  
Old 10-01-2008, 10:35 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by newhallone View Post
So how do you work on these bigger sets to trouble shoot and do tests and such? I was looking at my 64 roundie Zenith and you would have to have a crap load of extensions so you could put the chassis on the bench. Or can you normally access most test points easily from the topside of the chassis while in the cabinet?
They did make a test jig (13" and 19" screen sizes) that were designed to enable a chassis to be removed from the cabinet and tested on the bench. The test jig usually had a wide array of adapters and cables to fit the various chassis of the day. I don't own one of these; but, I'd like to. It sure would make working on console TV's easier.
Reply With Quote
  #3  
Old 10-01-2008, 10:43 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
Um yeah, ditto that.. What I manage to do and its not easy but it works for me is I made a wooden structure that will house the CRT to bolt up to. This structure is bolted to my bench. There I have the neccesary room to work on the chassis and see what I am doing. I makeshifted a grounding strap for the CRT to chassis. The only thing that is whacked about the whole setup is the yoke wiring on some CRT yokes are too short and of course the usual anode lead only being a certan length make moving around the chassis a chore cause it's still the same problem with the CRT being in the way but it's alot easier.

Quote:
Originally Posted by radiotvnut View Post
They did make a test jig (13" and 19" screen sizes) that were designed to enable a chassis to be removed from the cabinet and tested on the bench. The test jig usually had a wide array of adapters and cables to fit the various chassis of the day. I don't own one of these; but, I'd like to. It sure would make working on console TV's easier.
__________________
Honey, turn on the tv.. I'm cold!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:11 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.