Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 09-23-2008, 10:57 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by freakaftr8 View Post
I have seen a heck of alot of these newer RCA/GE sets with that same problem. My uncle had one about 10 yrs ago and he installed a sat dish and the coax connector hust snapped off the board when he screwed back in the coax cable! I also had seen 2 Sharp sets from the late 90's do the same.
It's not just the RCA's. It's all of them! On most newer sets, the coax connector is "made" onto the tuner. They are just crimped into place, and, not very good at that. They are very easy to rip off. Just the other day, I was given a 19" Duracrap (oops, I meant Durabrand) set that was found in the trash with a busted off RF connector. In some cases, I am able to reattach the connector to the tuner (I always solder, rather than crimp, the connector to the tuner housing). This was not the case here. The tuner was pretty much destroyed when the connector got yanked out. I just pulled a tuner from a junk board and that was that. My friend at the TV shop makes a good bit of $ by replacing busted off RF connectors.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:49 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.