Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 09-19-2008, 11:37 AM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
Quote:
Originally Posted by AUdubon5425 View Post
My 13" RCA XL-100, model EC333W (6/78): I found this set covered in 2 inches of dust in a building my boss was prepping for demolition. I took it home, cleaned it up, and surprisingly it has the best picture of any set in the house! Clear, sharp, wonderful colors. Will hook it up to a cable box when signals go digital next year.

The orange 9" set is a solid-state Philco Ford model 311BTG, chassis no. 3BH15. Bought it from a thrift store in Fargo, N.D. for $1.75 in 1998.

Unpictured is a 3-year-old 25" Durabrand TV in the living room. A family friend gave it to us when we moved in our house last year, as they "upgraded" to a plasma/LCD type set. I also have a 13" B&W Zenith from the mid-60's that has a beautiful picture but loses audio when you focus in on the channel.

Sure would like to have the CTC-40 console I grew up watching, it was a 1970 model that swiveled on it's legs.
It sounds like the tuner is out of alignment on your Zenith B/W, I've had a few do that from that era. The XL-100 you have is indeed a great set, I have one that I found in the garbage. Someone busted a 1" by 1" hole in the back vents and routed the wires for the deflection yoke outside the set for some reason. I repaired that, but the hole is still there, it's a shame because the rest is mint. I have heard about trying to power fluorescent lights that way ect....stupid. But anyways you are right about the picture on those, it is wonderful. One of the best I've seen on an XL-100. To stay on track, my daily watchers are a '73 Philco-Ford 18" hotel model set, a '74 GE Porta-Color and lately but not permanently a '63 Zenith 21" roundie with the 26KC20 chassis that I just restored. Also, that is a very nice Zenith you got there Shawn. And Ron, when we were talking at the convention you were trying to decide whether or not to get the XL-100, it is a very good thing that you did. You're lucky to have a NOS XL-100! I wished I had the room in Bob's van for the other one, but the 9 was way more important.
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26
Reply With Quote
  #2  
Old 09-19-2008, 01:08 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
Thanks Mark, I must say that your collection is looking good! Im somewhat envious!

The only thing I find interesting is that every time I have to move the set it requires a bit of realigning of the pincushion and purity rings. Im sure this is normal on most older sets anyway.
__________________
Honey, turn on the tv.. I'm cold!
Reply With Quote
  #3  
Old 09-20-2008, 06:08 AM
AUdubon5425's Avatar
AUdubon5425 AUdubon5425 is offline
VideoKarma Member
 
Join Date: Aug 2008
Location: Picayune, Miss.
Posts: 1,769
Quote:
Originally Posted by zenithfan1 View Post
It sounds like the tuner is out of alignment on your Zenith B/W, I've had a few do that from that era.
Thanks for the tip - I am just beginning to learn about TVs (thanks to y'all) and look forward to putting her on the bench in the next few months.

Shame about the cabinet on your XL-100 - really, all that to power a light fixture? Just doesn't make much sense.

Somewhere online I came across an old newspaper ad for an appliance dealer advertising an EC333W - the price was $279, very reasonable for such a good set in the late '70's.
__________________
AUdubon5425 Youtube Channel
Reply With Quote
  #4  
Old 09-23-2008, 07:54 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
My RCA CTC185 19" XL-100 gets the most use of the two TVs in my apartment. It's a very good set, bought it new eight years ago. Haven't had any major repairs done on it, although the RF antenna/cable port snapped off the tuner PC board shortly after I bought the set. Unfortunately, the warranty didn't cover the repair. Had the same problem (!) a year later, again had the local TV repair shop look at the set; same thing, the warranty didn't cover it.
However, after that the set worked well, and has been working very well since. It even survived a fall off its stand about two or three weeks ago while I was installing a new DVD player--the TV fell face down on the carpeted floor in my apartment, but, thankfully, it wasn't damaged. Had a slight problem with color splotches on the picture immediately after the mishap, but a minute or so of work with a magnet from an old loudspeaker cleared up the problem. Picture is now as good as when the set was new.

My other TV is a Zenith Sentry 2, SMS1917SG 19" table model. It is 13 years old, but it has few hours of use as I only used it four years at my former residence, and I only used it about two weeks after moving to my present apartment when the RCA was in the shop for repairs. (It has been in my bedroom ever since, now used only to cross-check when I have problems with my cable service.) However, the Zenith is in line to replace the CTC185 when the latter finally goes belly up. I'm not expecting that for quite some time, though, as the CTC185 just keeps going and going, like the Energizer battery or Timex watches (it takes a lickin' and keeps on tickin'). Amazing, when one considers that the set fell flat on the screen; this would and has ruined many modern TVs. I've heard and read here in AK of sets that were damaged irreparably when they fell off or were pushed off their stands or makeshift stands by mischievious cats, etc. Today's Magnavox, etc. CRT TVs (what few, and I do mean few, if any, of them are even available these days) aren't nearly as rugged as either of my sets or any TV made before about 2000 or so. I understand the last Magnavox CRT sets were so light it was possible to push them off the table or stand they are on simply by pushing the buttons on the control panel below the CRT. The recommendation was to use the remote to control these sets. I sometimes wonder how many Magnavox (and other) small CRT TVs wound up in repair shops for warranty repairs involving smashed CRTs or circuit panels, when the sets were accidentally or otherwise pushed off or fell off their stands.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
  #5  
Old 09-23-2008, 09:44 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
Quote:
Originally Posted by Jeffhs View Post
My RCA CTC185 19" XL-100 gets the most use of the two TVs in my apartment. It's a very good set, bought it new eight years ago. Haven't had any major repairs done on it, although the RF antenna/cable port snapped off the tuner PC board shortly after I bought the set. Unfortunately, the warranty didn't cover the repair. Had the same problem (!) a year later, again had the local TV repair shop look at the set; same thing, the warranty didn't cover it.
:
I have seen a heck of alot of these newer RCA/GE sets with that same problem. My uncle had one about 10 yrs ago and he installed a sat dish and the coax connector hust snapped off the board when he screwed back in the coax cable! I also had seen 2 Sharp sets from the late 90's do the same.
__________________
Honey, turn on the tv.. I'm cold!
Reply With Quote
Audiokarma
  #6  
Old 09-23-2008, 09:50 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
One of my first TVs was a 13" Samsung from about '81 or so....one time when I was like 5, me and my mom were having an argument about something immature and the set fell to the floor (carpeted). Anyway, the coax snapped off since it was connected to an archaic Sharp vhs deck with wired remote. Bet the 'rents paid a nice sum to fix that in the early 90s.....
Reply With Quote
  #7  
Old 09-23-2008, 10:32 PM
N9ZQA's Avatar
N9ZQA N9ZQA is offline
VK Member
 
Join Date: Feb 2005
Location: Joliet, Illinois
Posts: 161
Chromacolor II 25KC45

This set is currently my daily watcher, replacing the '65 Admiral that I haven't had the time or the bench space to dig into. It's in the living room, plugged into an Insignia DTV box and DVD player, and gets a few hours of use a night.

It was a thrift store find before I began playing with tube sets, and was in the basement for a while before I drug it back upstairs and set it in its current spot. Didn't require much except some contact cleaner and a good scrubbing of the module contacts to chase out a few intermittents. Set up the convergence and the greyscale, and was rewarded with an excellent picture that rivals what I've seen on newer sets. The only problem is that the width is a bit much, with no apparent way to adjust it.

No other old sets currently in circulation; there used to be an Admiral B/W portable on the bedroom dresser, but that got voted down by the wife as having no remote and sleep timer. I wasn't crazy about the possibility of falling asleep and leaving it running either.
Attached Images
File Type: jpg zenith25KC45.jpg (78.0 KB, 35 views)
Reply With Quote
  #8  
Old 09-23-2008, 10:57 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by freakaftr8 View Post
I have seen a heck of alot of these newer RCA/GE sets with that same problem. My uncle had one about 10 yrs ago and he installed a sat dish and the coax connector hust snapped off the board when he screwed back in the coax cable! I also had seen 2 Sharp sets from the late 90's do the same.
It's not just the RCA's. It's all of them! On most newer sets, the coax connector is "made" onto the tuner. They are just crimped into place, and, not very good at that. They are very easy to rip off. Just the other day, I was given a 19" Duracrap (oops, I meant Durabrand) set that was found in the trash with a busted off RF connector. In some cases, I am able to reattach the connector to the tuner (I always solder, rather than crimp, the connector to the tuner housing). This was not the case here. The tuner was pretty much destroyed when the connector got yanked out. I just pulled a tuner from a junk board and that was that. My friend at the TV shop makes a good bit of $ by replacing busted off RF connectors.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:09 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.