Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 09-15-2008, 12:22 AM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Quote:
Originally Posted by Dave A View Post
My factory Pilot magnifier has two clips/hooks on the upper corners that hang over the plastic grille strips and two standoffs on the bottom that position under the CRT somewhere. All are mounted from the back. It could be raised or lowered on any of the plastic strips for the best viewing angle. Needless to say, the weight of the thing was a stress on the plastic and cracked may of them. It also has a Pilot Radio decal on the top. No corner screws on the front.

Yours looks very close in size and shape, and could be a later model. The brackets were a good idea though to eliminate the grille problems.

And...shameless Beltron promo...you can clip leads to the CRT and test it.
My magnifier has no decal, but otherwise looks just like the one shown on tvhistory. The legs may be homemade. His papers include a pencil mechanical drawing with dimensions.

I have continuity on the 3KP4 CRT filament, but no Beltron to try it out further.

Using a 3KP1 for troubleshooting sounds like a good idea. Anybody have a spare you'd like to sell?

Phil Nelson
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:39 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.