![]() |
|
#61
|
|||
|
|||
|
No concave picture anymore, and the HOT is at about 110 degrees. Sets been running for maybe 15-20 minutes...
Edit: Sets been running for maybe 30-45 minutes now and the temperature seems to be holding at around 120 degrees. Now i know that 122 degrees is 50 degrees celsuis, so that's only 33% of the HOT's maximum rating. So far so good I'd say. Edit 2: TV's been running for well over an hour and the temperature is still holding at around 120 degrees! I dare say it's FIXED!! I can even touch the HOT with my finger. Edit 3: Put the back back on the TV and watched two DVD's on it. TV didn't give me a lick or trouble. Amazing how one bad 4.7 Jamicon lytic cap can cause the HOT to blow. I think, especally with my heatsink mod, that this new HOT will last a long time! |
|
#62
|
||||
|
||||
|
It sounds like you got it going. I'd play it a few days and if all goes well; it should be safe to sell. And, yes, those electrolytic caps can cause some weird problems.
|
|
#63
|
|||
|
|||
|
Meh, it'll give me an excuse to watch TV in the garage...
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|