|
Thanks guys! I had an old timer help me find a bad cap that had made my other set, a 17" Princess loose it's picture, but he did it as a favor and won't be willing to help me much with the Holliday. He restores radios for a living and quit working on TV's about ten years ago. I haven't kept in touch with the guy I bought the Holliday from (I used to work with him), but he still lives across the street from my parents and I'll check with him to see if he's still into vintage electronics, and if he can help me out. The fusistor in my set looked fine, but had obviously gone bad. The flyback does have some cracks and flaking, but overall it looks pretty good. I do have the Sams folder so that's taken care of. The radio I did the recap on is a Philco 40-160. I did lots of online research and asked a few questions along the way. I ended up replacing all the caps except the mica ones, a few resistors and quite a bit of rubber coated wire. Since I'd never done anything like that before, I checked, double checked and then checked again to make sure I had everything right. It came out great! It probably could still use an alignment, but it works and sounds better than I expected it would! It was a fun project and that's what made me drag the Predictas out of storage, but I better not bite off more than I can chew. If I can't find the help and advice I need locally, I'll probably go ahead and send the chassis out for rebuild sometime soon.
|