Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-23-2008, 05:39 PM
Philcofan42's Avatar
Philcofan42 Philcofan42 is offline
AK Member
 
Join Date: Aug 2008
Location: In the past
Posts: 28
Quote:
Originally Posted by leadlike View Post
Well, you're past the first hurdles now. Probably the next thing I would do is check the tubes. High voltage won't work at all if some key tubes are worn out. Do you have a multimeter and some basic test gear to do a restoration?

I have mostly worked on radios, and I know how you feel-a television is much more intimidating. Luckily, these sets are not too bad to work with once you can get to the main board. As with anything, take your time and results will follow...

wade
O.K., I couldn't resist (no pun intended) I put a resistor in and brought the power up just long enough to test it, and while I still get no picture at all, it picked up the sound from my local ABC affiliate loud and clear without an antenna. The guy I bought it from restores radios as his hobby and he has a working tube tester. I'll make that my next move.

Thanks!
Dan
Reply With Quote
  #2  
Old 08-23-2008, 08:33 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
If you have only recapped one radio and have trouble reading a schematic, this is not a good first project.

Bring it to your friend and have him coach you in understanding a schematic and replacing the electrolytic capacitors, for starters. Or just ask him for an estimate on what he would charge to restore it.

Phil Nelson
Reply With Quote
  #3  
Old 08-23-2008, 10:03 PM
marty59's Avatar
marty59 marty59 is offline
VideoKarma Member
 
Join Date: May 2008
Location: Arlington, Tx
Posts: 915
I have a Barber Pole model that I've been working on (and off) for the last couple of years....other projects come along/distractions/etc...but I enjoy it when I'm back on it. Even after you re-cap and replace out of tolerance resistors, there still/will be some hidden problems to address. A Predicta is NOT like working on old radios, where you do the above (and replace a tube or two) and you would have something that works! Predictas' have their quirks, but most are common to this model and there is lots of support for getting these things working, especially here!
Phil is correct (and he would know too) about working on them. There are valid reasons why TV Repairmen hated 'em!
My set is in the "operating" stage and I've been working out its issues one by one and I'm not done yet! I do like watching "The Twilight Zone" on it!!
And mostly, do a search here and you'll pull up lots of info.
That fusable link resistor should not just have opened up by itself unless there's some overcurrent. And like you said, you don't have any raster. A bad/shorted horizontal stage tube could cause a current problem or a bad/shorted/leaky cap in the power supply as well as the B+ boost cap could be a problem just for starters....
So having someone mentor you with this would be a good idea. Keep us informed!
Reply With Quote
  #4  
Old 08-24-2008, 11:53 AM
Philcofan42's Avatar
Philcofan42 Philcofan42 is offline
AK Member
 
Join Date: Aug 2008
Location: In the past
Posts: 28
Quote:
Originally Posted by marty59 View Post
My set is in the "operating" stage and I've been working out its issues one by one and I'm not done yet! I do like watching "The Twilight Zone" on it!!
My avatar is a photo of my 17" Princess playing Twilight Zone. It's probably the perfect show for watching on these sets because they are a little surreal looking anyway. The set's picture looks even better since I took that photo because I managed to polish most of the heavy scratches out of the screen cover and I also opened it up and removed a CRT warning label that had worked it's way down near the top of the screen.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:57 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.