Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 07-23-2008, 06:34 AM
steerpike2's Avatar
steerpike2 steerpike2 is offline
VK Member
 
Join Date: May 2008
Location: Transvaal, South Africa
Posts: 53
Many (most?) TV sets of around that time (before switched mode power supplies became common) used a live chassis. I.e, circuit 'ground' is tied directly to one side of the AC mains. You *cannot* add AV inputs to these sets without adding a mains isolating transformer (240v:240V) which is heavy and expensive if big enough for a large colour TV.
Still, if you want to proceed.... :-)
The tuner module (i assume you mean the silver metal box) probably only puts out the video- and sound intermediate frequencies - no good for AV in.

Audio you can easily tap into the 'hot' end of the volume control potentiometer - UNLESS it uses DC controlled volume, (look for a TBA120 chip - a comon one that does the sound detection - you could tap into its output pin)
Video is trickier - does the set use ICs, or is it all discrete transistors? If it uses ICs, check the part numbers until you find the one that does the composite video processing - ONE of its pins will be a suitable input. (if it used the TBA line of chips - I can give u pin numbers to tack into)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:29 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.