![]() |
|
#10
|
||||
|
||||
|
I'm going to say the Fly is bad, I removed it and the short went away, sound came on strong (white noise at least).
Pin 10 seems to be the problem area, pushing the fly back into the board and making connections with a screwdriver it kills the B+ when pin 10 is connected, an ohm check shows it's about 1 ohm to just about every other pin. All the diodes in the area check OK as does the HOT. I may be taking the hobby to the next level but I suspect it's a lower level. ![]()
|
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|