Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-17-2008, 03:05 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
What a find! Nice!

May not be HD, but jeez look at those internals! All metal I bet it weighs a good amount.
Reply With Quote
  #2  
Old 06-19-2008, 01:32 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by zenith2134 View Post
What a find! Nice!

May not be HD, but jeez look at those internals! All metal I bet it weighs a good amount.
Today's CRT TVs can weigh the proverbial ton as well, if the set has a large-screen tube. I've seen 25" table model sets on eBay listed as "pickup only" because they weigh upwards of 100 pounds. Much of that weight, again, is the CRT. My own 1999 RCA CTC185 weighs some 64 pounds; blame most of it on the tube, as almost the entire set is built on one large PC board. There is very little metal in modern sets, which is why I wouldn't want to have a Magnavox-branded portable color set; I understand these TVs are so light that even the simple act of pressing one of the front-panel control buttons will push the set off the table, stand, etc. on or in which it is installed. It is probably best, IMO, to operate these sets with the remote. RCA/Thomson sets, OTOH, are built much more solidly (again IMO) than "Magnavox" branded TVs. My own set cannot be pushed off the stand simply by pressing the front-panel buttons; one would have to make a genuine effort to move this set even a fraction of an inch--if the set is to be moved, it must be physically lifted off the stand and carried.

Hmmm. I wonder how many "Magnavox" branded color TVs have shown up in repair shops (during the warranty period, of course) with smashed CRTs or PC boards because they fell off or were accidentally pushed off their stands.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
  #3  
Old 06-19-2008, 03:22 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Thumbs up

That looks like an RCA TV I had years ago, with the plug in circuit modules. I still have a few of those modules kicking around if you might need 'em.
__________________
Reply With Quote
  #4  
Old 06-19-2008, 03:47 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by Jeffhs View Post
Today's CRT TVs can weigh the proverbial ton as well, if the set has a large-screen tube. I've seen 25" table model sets on eBay listed as "pickup only" because they weigh upwards of 100 pounds. Much of that weight, again, is the CRT. My own 1999 RCA CTC185 weighs some 64 pounds; blame most of it on the tube, as almost the entire set is built on one large PC board. There is very little metal in modern sets, which is why I wouldn't want to have a Magnavox-branded portable color set; I understand these TVs are so light that even the simple act of pressing one of the front-panel control buttons will push the set off the table, stand, etc. on or in which it is installed. It is probably best, IMO, to operate these sets with the remote. RCA/Thomson sets, OTOH, are built much more solidly (again IMO) than "Magnavox" branded TVs. My own set cannot be pushed off the stand simply by pressing the front-panel buttons; one would have to make a genuine effort to move this set even a fraction of an inch--if the set is to be moved, it must be physically lifted off the stand and carried.

Hmmm. I wonder how many "Magnavox" branded color TVs have shown up in repair shops (during the warranty period, of course) with smashed CRTs or PC boards because they fell off or were accidentally pushed off their stands.
The newer large screen sets are indeed still fairly heavy. The really hefty ones are the flat screen CRT sets. The 32" and 36" sets are very hard to deal with. Even though I've picked those large sets up myself; it would be better (and safer) for two people to do it.

Even though the newer CRT sets still have some weight to them; they are not as heavy as those steel cabinet 25" RCA and Zenith table models from the '70's. But, as we all know, those sets were full of metal on top of the heavy CRT.

I too have seen those cheap TV's with the paper thin cabinet. They are very easy to bend and the front buttons will break without too much effort. I think the worst quality cabinet I've seen in recent years was that of a Sharp set. Those cabinets seem to be very brittle and will break very easily.
Reply With Quote
  #5  
Old 06-19-2008, 04:17 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
I was of course referring to the weight for its screen size. New sets with a comparable screen size CRT are much lighter. Sure there are gargantuan 36" CRT sets today, as well as heavy 25inchers where all of the weight is the tube. A ctc-72 is a much heavier chassis than anything found in a modern tv.

Radiotvnut, my Sony Wega 27" flat screen was heavy, but man was the cabinet cheap! I felt like the sides and bottom bezel wuld snap in half when handling it. Cheap as could be.
Reply With Quote
Audiokarma
  #6  
Old 06-20-2008, 12:28 AM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by radiotvnut View Post
I think the worst quality cabinet I've seen in recent years was that of a Sharp set. Those cabinets seem to be very brittle and will break very easily.

I Concur - I have one with a back that is a glued together jigsaw-puzzle from being set down roughly. Went to move it recently and the flared apron on the front broke - couldn't be more than a 16th of an inch of plastic. Sharp, but THIN...

Cheers
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:39 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.