![]() |
|
|
|
#1
|
||||
|
||||
|
Building a wide band VHF RF amplifier with tubes or other discrete parts requires a lot of skill to pull off and have it be low noise, decent gain, and not oscillate. Whoever may have made it channel specific (which is easier, using tuned circuits), to get some weak station of interest. Strong stations on other channels may get thru with decent enough signal to noise ratio to make it usable to him.
IOW, don't expect a lot of performance if it does work.
__________________
|
|
#2
|
||||
|
||||
|
"IOW, don't expect a lot of performance if it does work."
I know, but that doesn't even concern me. I will bid on it, but I want to have it more for the curiosity aspect of it than for any other reason. I collect not just the vintage TV sets, but also almost everything related to the early days of television. |
|
#3
|
||||
|
||||
|
Por um punhado de Reais vale a pena arriscar, você nunca perderá muito, mesmo que não funcione.
![]() For all of you non-portuguese speaking folks, I just said that for the amount involved Captain Video isn´t risking much, even if that contraption doesn´t work.
__________________
Confusion will be my epitaph. |
|
#4
|
||||
|
||||
|
Haha!!! É verdade!!!
![]() ![]() That's true!!! ![]()
|
|
#5
|
||||
|
||||
|
Quote:
UHF boosting is the zenith of RF amp building art. The big thing I learned is that if the TV set involved is halfway decent then the only real gain in adding a booster is if it can be placed nearest the antenna to push the signal down the line. |
| Audiokarma |
|
#6
|
||||
|
||||
|
In the end, I didn't bought it. It finished for a value way too higher than what I was actually willing to pay.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|