![]() |
|
|
|
#1
|
||||
|
||||
|
That is definitely a non-Hi-Fi model. VU meters were common on VCRs in the professional world. It would be a nice machine for a VCR collection, but not much good for real-world use anymore. Here is a link to a brochure for it:
http://www.bcs.tv/pdf/model/6126/jvc_br-6400u.pdf
__________________
Chris Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did." |
|
#2
|
||||
|
||||
|
What defines a "Hi-Fi" model? In my book it was always wether you got stereo signal in/out or a single channel of audio. This definitely does stereo, and the brochure confirms that, and it even has optional Dolby NR if you wanted to use that. Seems pretty "hi-fi" to me so far as VCR's go.
__________________
Retired USN. "Good ........ bad ........ I'm the guy with the gun." Ash, Army of Darkness |
|
#3
|
|||
|
|||
|
...
Last edited by andy; 12-07-2021 at 05:54 PM. |
|
#4
|
||||
|
||||
|
Yes, what Andy said. "Hi-Fi" in VCRs is a specific term; the technical name was AFM (audio frequency modulation). Linear stereo audio is 40-12000 Hz with 50 dB signal-to-noise ratio at best; Hi-Fi could be 20-20000 Hz with near 80 dB S/N ratio.
__________________
Chris Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did." |
![]() |
| Thread Tools | |
| Display Modes | |
|
|