Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 04-15-2008, 05:11 PM
kbmuri's Avatar
kbmuri kbmuri is offline
VideoKarma Member
 
Join Date: May 2006
Location: Fort Wayne, IN
Posts: 590
I bought a Space Command 400 remote from that ePay place:
http://cgi.ebay.com/ws/eBayISAPI.dll...m=330223873934

Completely mechanical, pressing each spring-loaded button causes a striker to ping a corresponding tuning fork.

I struck each button into the mike of an audio spectrum analyzer. Results were as follows:

Channel-Higher button:


Channel-Lower button


Sound/Mute button


Volume-On/Off button


Channel-higher ping -- 9.04 KHz.
Channel-lower ping -- 8.33 kHz
Sound/Mute ping -- 8.07 kHz
Volume-On/Off ping -- 7.66 kHz.

(Measurements taken at curve peak).

There's a pretty good (but not great) correspondence between 5X these values and your values. Obviously your remote is truly "ultrasonic". Mine is quite audible. I remember urban legends that dogs used to be able to change channels on these TVs by barking. Maybe that's why they upped the frequency (when electronics advances made it possible).

I wonder what the "spec" frequencies are for the 400. Does my remote need tuned? How do you tune a mechanical version?

Related fun here: http://www.audiokarma.org/forums/sho...39#post1792639
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:05 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.