Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 07-08-2004, 04:46 PM
Steve McVoy's Avatar
Steve McVoy Steve McVoy is offline
VideoKarma Member
 
Join Date: Oct 2002
Location: Columbus, Ohio
Posts: 1,619
I'm sure the photos of the two traces are from the two grids. The first section of the tube has the grid connected to the oscillator. The waveform is amplified and inverted in the first section. A portion of the signal from the first plate (inverted as compared to the grid of that section) is fed to the grid of the second section. That is the purpose of the C57, C142, R117, etc. Those components attenuate the signal from the plate of the first section by an amount equal to the gain of the first section, so thr proper amplitude is fed to the grid of the second section.

The second section of the tube amplifies and inverts that waveform. So, the waveforms supplied to the CRT defectin plates are inverted.

The inversion process take place as Steve K describes it.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:32 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.