Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 04-08-2008, 05:31 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
I think all that those resistors are doing is being a voltage divider across the 6.3V heater supply. To fake a center-tap on the 6.3V power transformer winding. To make each leg of the heater supply look like 3.15V from chassis ground. It's a scheme to reduce hum from getting into the audio. I'd use bigger wattage resistors for replacements. But if you can measure with an ohmmeter 50 ohms from the chassis to one of the heater lines (when the power is off), then both resistors are good, and you need not worry about them.
__________________
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:02 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.