Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 04-01-2008, 11:58 PM
wkand's Avatar
wkand wkand is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Everett WA
Posts: 262
Another easy test is to use a neon bulb electrical testr and hold it close to the cap lead on the Horiz Out tube withthe set running. If it glows you have Horiz-Osc, and output functioning. The HV Rect tube gets it's filaments from the inductive pickup of the flyback.

If you have an oscilloscope, you could check waveforms at the control grid of the H-out tube, but never use a scope to check HV out.

Swapping paper caps in the horiz sectons may be your only recourse to find out if the set is worth fxing. Measure DC voltages around the osc tube .

Good Luck!!!

Another Old Fogey
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:10 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.