![]() |
|
|
|
#1
|
||||
|
||||
|
125 is kind of high, and those old sets don't really have any B+ regulation. It could overtax the flyback, I suppose. But you can get a step-down transformer, or a Bryan says, change the tap on your power transformer. A Variac is an expensive way to go, but it will work. I'd like to see my old sets running on about 110. Another old trick is to put a weak 5U4 in the set if it uses one, or whatever the B+ rectifier is if it's a tube
![]() Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10 |
|
#2
|
|||
|
|||
|
You can also use a big 6 volt power transformer wired as a bucking transformer to drop the voltage down a bit - see: http://www.allaboutcircuits.com/vol_2/chpt_9/5.html
Just find a transformer capable of handling the current. Connect it according to the diagram (primary to secondary on one side, connected to the line, other end of primary connected to the line and the load, and the other end of the secondary to the load). Check it with your meter before plugging the set into it, if wired wrong you'll add six volts instead of subtracting it! -Ian |
![]() |
| Thread Tools | |
| Display Modes | |
|
|