![]() |
|
#15
|
||||
|
||||
|
I don't have a schematic for this thing
![]() I was stupid and felt sorry for it sitting there on ebay , bid $9.99 for it . thats where the trouble all started ![]() There is only 1 other one that I have seen on the internet , I emailed the owner and he dosn't have a schematic either . I should have got a Heathkit instead . Who knows it might be a capacitor , I cannot get a reading off it at all with the VTVM , even at the RX1 meg setting . I have studied the circuit , and it seems alot like a hartley oscillator circuit , which would make it the part in question a resistor . I tried a 470 ohm resistor in it late last night and had no better results I have switched the tubes and still no better . I had a audio generator hooked up to the oscillator tube , when its connected to the grid the it doesn't produce bars too well , but when it's on the plate I was getting a nice bar pattern . perhaps the next step is to try a cap
|
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|