Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 03-11-2008, 11:41 AM
bgadow's Avatar
bgadow bgadow is offline
VideoKarma Member
 
Join Date: Oct 2003
Location: Federalsburg, MD
Posts: 5,865
I will add that when I started collecting radios/tv sets as a kid I always rushed home with my new find and quickly plugged it in to see if it worked. There was nobody back then to tell me any different, and I really didn't have an catastrophies out of it. Some sets didn't do much of anything, some worked quite well. I don't recall ever having one that had a dead short or something that caused dramatic results. Maybe the worst thing was on some radios that had black beauties-those things can go off like a shot, though it never hurt anything in my case, just scared me. (had one am/fm Zenith that would go off about once every 5 minutes! would keep playing, though) If a set didn't work back then it wasn't a whole lot of good to me as I had no repair ablities save for replacing tubes. I knew nothing about caps, and couldn't solder worth a darn anyway. Even later, when I figured out about recapping, I tended to do dumb things like install used caps out of 70s TV sets. The first old TV I ever had is a '54 RCA console that worked fine when I got it, and I put many hours on it through the 80s. The only defect was a stretched vertical (conehead syndrome!) which I couldn't adjust out. I eventually attempted a recap with a mix of new and used caps and when I was done the set didn't work at all. That has been almost 20 years ago, and I really need to redo that thing one of these days.
__________________
Bryan
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:23 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.