Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-09-2008, 05:52 PM
Old1625's Avatar
Old1625 Old1625 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Western MA
Posts: 426
Quote:
Originally Posted by Gianni View Post
Dear Giulio,
please to meet you,
your Du Mont is a nice tv but - if i can write my humble opinion - you are too prone to replace a lot of components (not original) and to make a savage ''recapping'' (what an ugly word...) in your TVs.
You are a nice, passionate '' TV guy '' but try to restore a capacitor, please:
the little-great history of TV-stuff will be grateful and...
...we can buy a new TV in any electronic shop.
I was thinking of write this opinion on the repair/restore question and now i take the occasion to do it in this thread, you will not complain about me


P.S.:
My compliments to you for your sets!
I'm a tough old veteran of old Radio/TV salvage. And I am notorious for just plugging in an old set just to see what it can do in an unrestored condition. This is why I am nicknamed by locals here in my own stompin' grounds as "Dangerous Dave"....

Oh well, I've always thought that one of the greatest thrills is to plug in that old set found in the attic, and see what the ol' girl will do.

More times than not--providing the set didn't initially respond with an angry 120 Hz hum or buzz--the set would actually perform! I went into an electronics parts store about 3 years ago--a store where I had been doing business 30+ years with the father of that operation, and now with the son--and said son had collected an old console from someone's attic on one of his audio installs.

He was there when I eyed the old radio he had recently collected, removed some detritus and such as laid in the chassis by mice, and--after looking things over--just plugged it in. WTF! he exclaimed. I said "Relax; I have my winter overcoat here to slap it down if it should burst into flames."

The radio hummed a little more than one would like to hear from a fully-restored receiver, but--to my friend's astonishment--I had the radio receiving a local station, and blaring out news at a high volume for an old set.

I didn't run it for long, and would certainly not recommend doing so in any case--without replacing all the capacitors, of course.

The bottom line here, folks, is that half the thrill I get out of antique radio or telly resto is the actually seeing what it will do after simply being plugged in!

I know the "correct" way is to walk these old sets up carefully on a variac to allow the capacitors to redevelop their dielectric. But I know I will probably replace the dad-blamed caps anyway--so why bother....? Worst thing is that something goes pop or bang....adds to the excitement. It's at least half the thrill of exploring an antique piece of electronic gear... And for the most part causes no harm if one is to at least some degree knowledgeable, and on-the-ball, and keeps their hand on the plug to yank it if things turn bad....
Reply With Quote
  #2  
Old 03-09-2008, 08:27 PM
M3-SRT8's Avatar
M3-SRT8 M3-SRT8 is offline
VideoKarma Member
 
Join Date: Oct 2007
Location: Worcester, Mass
Posts: 652
Dave, you're a man after Dick Slade's heart. He's the guy who was so kind to give me that RCA 630TS that I restored. He wanted to just "plug her in & let her rip."

I plugged her in, without the 5U4's, just to see her light up all the tubes. I didn't try to reform the electrolytics, because I figured some were beyond hope (I was right).

I did heat up the chassis, upside down, with a heat gun to chase away any condensation, heat up the resistors, etc. After that, I just started replacing all the electrolytics & tube capacitors.

Call it overkill, but the thought of wiping out an unobtainium part(s) was overwhelming...

Ahhhh. I feel better. Now, on to the Next Project.

LJB
Reply With Quote
  #3  
Old 03-10-2008, 09:56 AM
Captain Video's Avatar
Captain Video Captain Video is offline
VideoKarma Member
 
Join Date: Sep 2002
Location: Brazil.
Posts: 1,014
Quote:
Originally Posted by Old1625 View Post
I'm a tough old veteran of old Radio/TV salvage. And I am notorious for just plugging in an old set just to see what it can do in an unrestored condition. This is why I am nicknamed by locals here in my own stompin' grounds as "Dangerous Dave"....

Oh well, I've always thought that one of the greatest thrills is to plug in that old set found in the attic, and see what the ol' girl will do.

More times than not--providing the set didn't initially respond with an angry 120 Hz hum or buzz--the set would actually perform! I went into an electronics parts store about 3 years ago--a store where I had been doing business 30+ years with the father of that operation, and now with the son--and said son had collected an old console from someone's attic on one of his audio installs.

He was there when I eyed the old radio he had recently collected, removed some detritus and such as laid in the chassis by mice, and--after looking things over--just plugged it in. WTF! he exclaimed. I said "Relax; I have my winter overcoat here to slap it down if it should burst into flames."

The radio hummed a little more than one would like to hear from a fully-restored receiver, but--to my friend's astonishment--I had the radio receiving a local station, and blaring out news at a high volume for an old set.

I didn't run it for long, and would certainly not recommend doing so in any case--without replacing all the capacitors, of course.

The bottom line here, folks, is that half the thrill I get out of antique radio or telly resto is the actually seeing what it will do after simply being plugged in!

I know the "correct" way is to walk these old sets up carefully on a variac to allow the capacitors to redevelop their dielectric. But I know I will probably replace the dad-blamed caps anyway--so why bother....? Worst thing is that something goes pop or bang....adds to the excitement. It's at least half the thrill of exploring an antique piece of electronic gear... And for the most part causes no harm if one is to at least some degree knowledgeable, and on-the-ball, and keeps their hand on the plug to yank it if things turn bad....
Haha!!! "Dangerous Dave" , you are a bold one!!!
Reply With Quote
  #4  
Old 03-10-2008, 10:00 AM
Captain Video's Avatar
Captain Video Captain Video is offline
VideoKarma Member
 
Join Date: Sep 2002
Location: Brazil.
Posts: 1,014
It was me who alerted for the existence of this Dumont in Italy. I am glad that one of us ( AKers ) now have it!
Reply With Quote
  #5  
Old 03-28-2008, 06:28 PM
radio63's Avatar
radio63 radio63 is offline
Still Y2K Compliant!
 
Join Date: Oct 2005
Location: San Diego, CA
Posts: 270
Quote:
Originally Posted by Old1625 View Post
The bottom line here, folks, is that half the thrill I get out of antique radio or telly resto is the actually seeing what it will do after simply being plugged in! I know the "correct" way is to walk these old sets up carefully on a variac to allow the capacitors to redevelop their dielectric. But I know I will probably replace the dad-blamed caps anyway--so why bother....? Worst thing is that something goes pop or bang....adds to the excitement.
So am I to understand that the worst thing that can happen is the power TX will burn up or the set will catch fire? Not worth it in my humble opinion. I always resist powering up any radio or TV that has sat unused until it is thoroughly checked out. I always urge people that don't know anything about electronics to never plug an old unit such as an old radio or TV in. Just not worth the risk. By the time something goes "pop or bang", it just might be a wee bit too late to prevent a catastrophe. Just my two cents.

Gilbert
__________________
I don't know anything about ignorance and I could care less about apathy.

www.galaxymoonbeamnightsite.com
Reply With Quote
Audiokarma
  #6  
Old 03-29-2008, 05:16 AM
Giulio Maiocco's Avatar
Giulio Maiocco Giulio Maiocco is offline
Geloso prototype owner
 
Join Date: Aug 2005
Location: Fossano (CN) Italy
Posts: 63
Gianni,

for me there is no need to apologize, I can easily understand your point of view...

If you like, we can discuss directly (in Italian, so we can understand each other easier), just email me: g.maiocco(at)tiscali.it...

Cheers

Giulio
Reply With Quote
  #7  
Old 04-06-2008, 10:11 AM
Gianni's Avatar
Gianni Gianni is offline
Slave to a blue dog
 
Join Date: Apr 2007
Location: Pescara - ITALIA
Posts: 73
Lightbulb

Quote:
Originally Posted by Giulio Maiocco View Post
Gianni,

for me there is no need to apologize, I can easily understand your point of view...

If you like, we can discuss directly (in Italian, so we can understand each other easier), just email me: g.maiocco(at)tiscali.it...

Cheers

Giulio
Thank you, Giulio, i will write in italian an e-mail for you.
What do you think of Ducati capacitors?
__________________
<< Hi Gianni!

By the way, no need to apologize for your English, you speak 3 languages!
__________________
John Folsom >>
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:22 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.