Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 03-04-2008, 03:46 AM
yagosaga's Avatar
yagosaga yagosaga is offline
VK Member
 
Join Date: Jan 2005
Location: in Braunschweig
Posts: 690
Hi to all.

meanwhile I have got a new 6BG6-G. With it I get full horizontal current and full EHT.

After 10 minutes, the horizontal synchronisation run out of control. And the picture became brighter and brighter.

I had to replace the following caps:

In the oscillator: the leaky caps C155 (22 nF), C157 (220 nF). Where I made replacenemts, I kept the old caps in the set and cut only one end of them. The new caps were inserted, so everyone can easily remove the new ones and restore the chassis to its former condition. R179 (100 K) was out of tolerance. Additional, I have replaced C161 (22 nF) due to its electrical loading.

In the D.C. restoration part of the video circuit: C130 (47 nF).

The set is working now without faults. The 10BP4A is tested with 0.4 mA.

- Eckhard
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:02 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.