|
|
|
#14
02-23-2008, 01:42 PM
|
|||
|
|||
|
Well, I got the schematics and did some voltage checks. These are all measured from chassis ground:
Screens: Pin 3 (Red) - 435v Pin 7 (Green) - 433v Pin 11 (Blue) - 435v Grids: Pin 2 (Red) - 72v Pin 6 (Green) - 87v Pin 12 (Blue) - 80v Plates: Pin 4 (Red) - 182v Pin 5 (Green) - 191v Pin 13 (Blue) - 181v So... I'm getting voltage into the tube. All three filaments light. Why no green? -Ian 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode