Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 02-16-2008, 07:22 PM
Carmine's Avatar
Carmine Carmine is offline
...enjoys spaghetti.
 
Join Date: Feb 2003
Location: Detroit area
Posts: 1,612
Quote:
Originally Posted by Chad Hauris View Post
A neon lamp tester carefully held near the plate lead of the horiz output tube will tell if the horiz output stage is working at all (should light when held near the insulation of the lead) This is where I would start.

The goo I think is some kind of silicone or other sealant that has disintegrated and ran down the side of the CRT, I think it was originally applied around the HV connector. Have seen this on other similar Zenith sets.
The standard 120V voltage tester type of neon lamp?

Glad to hear that goo might belong there.
__________________
From Captain Video, 1/4/2007
"It seems that Italian people are very prone to preserve antique stuff."
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:23 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.