Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 02-10-2008, 02:58 PM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
I have an early 1950's Zenith console which has a variation on this setup...it uses an autotransformer to supply a higher voltage to the rectifier for higher plate supply voltage but has the filaments in a series string and a hot chassis.

I'm not sure why they would have used just a filament transformer on your set with a hot chassis? What is the tube line-up, are they all 6V or 12v filament tubes? I have seen setups like this on tube type color TV's with a hot chassis, but it is often an autotransformer with taps for the CRT filament and then other tube filament strings in series...this setup is because most color CRT filaments draw a different amount of current than the amplifier tubes in it but not sure why a radio would do it?

They probably looked at the cost of a full power transformer and decided it was too much but still it seems strange.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:02 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.