Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 02-08-2008, 11:25 PM
Old1625's Avatar
Old1625 Old1625 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Western MA
Posts: 426
Many thanks for the input, Sean! The clipping on top I'm guessing is where the HOT ctrl grid is being driven into conduction. There's something here we're not seeing. If the HOT gets insufficient drive there is no HT. And the HOT goes to pieces with all that B+ and no developed grid bias. At the other extreme excessive drive can cause the output tube to be biased stone-cold, and thus not deliver the necessary output to the flyback in the doghouse--again: Insufficient HV. Just my humble theory...

This is my current thought on this matter: He's got a resistance value for plate res on his disch stage than I see called for in my scam of a similar model that shares a lot of the same stuff. Are we dealing p'raps with a typo here...? I'm still puzzling over the call for a 560K resistor where I am not used to seeing such plate res so high. And the scam I've been working from for a similar model shows a value of res of 150K. If he changes to that value I think his problems will be over. IMHO....

I've got the scams from him, and I'm giving it some thought. Lately I've been out straight, but let's see what we can do. Man! It has been so long since I've enjoyed the glory of troubleshooting an old set!

Thanks again for your input!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:00 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.