Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 02-05-2008, 01:34 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
The B+ is probably too high. Normal B+ for these sets is around 140 volts. There are 3 caps in the power supply that you need to change. IIRC, they are a 39uf, 2.2uf, and 15 uf. You can use a 47uf in place of the 39uf. They are located on the right front corner of the main chassis. There will be an IC and a transistor mounted on a heatsink in the area where the caps are. Also, check the chopper transistor (the one mounted on the heatsink) for a short. If it's shorted, the IC is probably bad as well.

One last thing (which should probably be first on the list). Check the horizontal output transistor for a short. If it's shorted, there is a blue cap located close to the transistor that may be swollen.

But, whatever you do, replace those electrolytics in the power supply!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:53 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.