Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 01-29-2008, 01:38 PM
RetroHacker RetroHacker is offline
Electronics Accumulator
 
Join Date: Jan 2005
Location: Niskayuna, NY
Posts: 464
Any kind of manufactured glass product like this has the potential for a manufacturing defect to suddenly spring up. Any time glass is worked, there are stresses involved. And glass is really more of a very, extremely, slow moving liquid anyway. It can change a bit in shape over time - and if it was stressed or defective in some way, I could see how it would crack. Car windows, being tempered, are laminated with plastic and somesuch - and a tiny crack or break can spread very quickly. Especially something like a windsheild that is glued in all around, and if the metal of the car deforms somehow, or is putting pressure on it, the crack would expand as well. Picture tubes are full of vacuum (or is that not full of it... ). Lots of pressure is trying to crush the tube from the outside. One little crack in the right spot and *FOOMP!*.

Modern tubes have the "integral implosion protection" which is just a tensioned rimband around the outside, to crush the tube in on itself if it breaks. Old tubes, without this, lived behind glass, just in case.

One thing I've wondered - is on the 21FJP22, with the bonded safety glass, what happens if it implodes and the glass has been de-glued due to cataracts and taped back on? It should provide protection, but will it stop glass from flying everywhere?

But, all that aside, these things really have a one in a million chance of spontaneously imploding if they're not abused/kicked/dropped.

But still. The set came with a very durable glass in front of it, and I think that leaving it there is a good idea - but I wouldn't lie awake at night if it were missing. Any spontaneously occurring crack is most likely to happen at the weakest area of the tube AFAIK. That would be the neck or stem. And such failure would be just a hiss as the vacuum escaped. Nothing spectacular.

I've never had a tube implode unexpectedly. I've had some tubes unexpectedly NOT implode though - modern tubes at least are very tough. When throwing away some dud modern tubes, even chucking it into a dumpster won't always break it (the face and sides are very thick).

-Ian
Reply With Quote
  #2  
Old 01-29-2008, 08:27 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-07-2021 at 12:00 PM.
Reply With Quote
  #3  
Old 01-29-2008, 10:55 PM
peverett peverett is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 883
I have radios built in the 1940s where if a knob is removed or you touch one of the screws holding the chassis in , you could be touching 120VAC (if it was plugged in). Even some of the early Hoffman TVs that I have have a live chassis where safety depends on paper type insulation. Would not fly today at all.

I also have a 1963 Ford Falcon-no fan shield on this model (as well as a solid steel steering column). One of my mother's brothers was killed by a car with no fan shield-the fan flew apart as he was working on it and hit him in the head.

In general, safety is a much higher priority in things built today.
Reply With Quote
  #4  
Old 01-30-2008, 01:35 PM
Brach
Guest
 
Posts: n/a
Hmmmm

[QUOTE=peverett;

I also have a 1963 Ford Falcon-no fan shield on this model (as well as a solid steel steering column). One of my mother's brothers was killed by a car with no fan shield-the fan flew apart as he was working on it and hit him in the head.

In general, safety is a much higher priority in things built today.[/QUOTE]



Where have I read about the Falcon's safety issues in here? Seems like some brash and sassy writer claimed the Falcon is extremely unsafe only to be punished for doing so.
Reply With Quote
  #5  
Old 01-30-2008, 01:53 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Wow, that implosion photo is scary.

The safety glass blew out, too, as David noted. But who knows -- had it not been there, perhaps the lady would have been injured more seriously. The safety glass might have slowed down the CRT shards, broken them into smaller pieces, etc.

You have to wonder what happened right before the implosion. A frying sound, followed by a loud pop. I wonder if an electrolytic capacitor blew up. If a can electrolytic blew its top, or took off like a little rocket, I could imagine that cracking the neck of a CRT.

I have never had a radio start on fire, but I have had a couple of electrolytics that popped with an impressive firecracker noise.

In my irresponsible teen years, we used to take our .22 rifles to the town dump, shooting at rats and every glass item in sight. We wrecked plenty of old radios and appliances, but we never managed to blow up a TV. Thank God there is no videotape of me on those excursions, shooting up old console radios that I would now gladly rescue and restore.

Phil Nelson
Reply With Quote
Audiokarma
  #6  
Old 01-30-2008, 04:09 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Exclamation

Back in the mid 70's we had a B&W TV that we were tossing. Probably something we'd restore today, but back then just an old POS... Cheap wood cabinet with fake wood grain plastic "paper" over it. Anyway, the town wanted us to let the vacuum out of the CRTs, to safe it for the trash men. A few other CRTs were easy, just break off the little glass seal in the middle of the tube pins in back. But one CRT, 21 incher or so, had a bakelite tube plug covering over the seal, and thus inaccessable. So I decided to put the TV at the curb, without the chassis and back, and standing about 30 feet away, toss rocks to try to bust the neck off. I missed the neck, but scored a hit right in the big part of the tube. KABLAMM! Glass flying all over the place, and it turned out to be wise to stand as far away as I did...
__________________
Reply With Quote
  #7  
Old 01-30-2008, 01:32 PM
Brach
Guest
 
Posts: n/a
I agree with Andy but...

Quote:
Originally Posted by andy View Post
They won't be any worse than a 21FBP22 with separate safety glass.
Logically that glue would also help keep at least some glass from flying. If the glue is new it could even make a huge difference.

I suspect the non-laminated safety glass would not stop any glass from flying. I think the non-laminated safety glass is simply to help anything hitting the CRT directly.
Reply With Quote
  #8  
Old 01-30-2008, 01:40 PM
RetroHacker RetroHacker is offline
Electronics Accumulator
 
Join Date: Jan 2005
Location: Niskayuna, NY
Posts: 464
Quote:
Originally Posted by Brach
Logically that glue would also help keep at least some glass from flying. If the glue is new it could even make a huge difference.
That's just the thing - when a tube with cataracts gets repaired, the safety glass doesn't get glued back onto the tube. It's impossible to get it glued on and have it be perfectly clear. Typically the glass just gets taped around the edge of the tube with packaging tape.

I actually don't think it would be any more or less safe this way. In a way, it may even prevent glass from flying out - instead of an imploding tube simply breaking the faceplate along with the face of the tube (because they're glued together), it would have to hit the safety glass hard enough to break it _and_ blow through it to cause harm.

But, that's really all just speculation. I have no real clue which is safer. As others have pointed out, safety wasn't a prime concern back then. And yet we're all still alive...

-Ian
Reply With Quote
  #9  
Old 01-30-2008, 01:50 PM
Brach
Guest
 
Posts: n/a
The bonded or laminated safety glass is 100%

definately safer... no question about it.

How much safer? I think alot safer in many situations. So if it's just 1% safer is it worth the trouble to get it re-laminated? I guess it depends on how much you value any extra amount of extra safety.

I am 100% certain there is a product available to re-laminate. I will eventually figure out what that is whether I get help from those who know here or not.

Somebody here definately knows what product is available and where to get it.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:16 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.