Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 01-06-2008, 04:20 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by Jeffhs View Post

BTW, the comment regarding the volume limiters for the TV and AM/FM radio in this TV has me wondering. Why on earth would the TV's volume limiter be set for normal listening, while the limiter for the radio was set at maximum?
Looking at it from a systems engineering point of view, I'd almost would think that the FM radio IF and detector could be the same one used for the TV sound (which is also an FM signal). The FM radio would then need its local oscillator to be 4.5Mhz higher, instead of 10.7MHz higher, to get it to an IF of 4.5MHz. Could be done. However, TV sound deviation is less than that used for FM broadcast radio. Thus the TV sound will come out at a lower volume than the FM radio stations would.

Another consideration is that it would be cheaper (at the low manufacturing volumes these sets would be done at) to just grab AM/FM radio circuit boards, the ones intended for clock radios, and just stuff them inside existing design TV sets. This is the usual reason for otherwise stupid design decisions one finds inside TV sets.
__________________
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:40 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.