Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 01-03-2008, 11:34 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Loose connections are a suspect. Try tapping the board with the insulated handle of a screwdriver and see if you can make the problem act up. If that does not work, try spraying parts on the PC board with freeze spray. Otherwise, you may have to obtain a schematic and trace the circuit with a scope and/or multimeter to find the problem.

While you've got it apart, resolder the horizontal drive transformer. That's the little transformer connected to the base pin of the horizontal output transistor. This transformer is bad to have loose connections and can take out the HOT as well as the power supply.

That set is probably worth spending a little time on if the CRT is still strong. Those mid '90's sets seem to be a little better than the current cheap CRT junk.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:08 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.