Quote:
Originally Posted by radiotvnut
And one thing I HATE are these newer TV's with no menu button on them. I can't remember the times I've brought home one of these from the TV shop just to get it working and find out a universal remote won't bring up the menu and an original remote is either too expensive or NLA. It's pretty bad when they are too cheap to even put a menu button on the set. It used to be the other way around. The remotes only had basic functions and the clock / channel set-up controls were on the set behing a door. That's the way our circa '83 Magnavox 19" was. BTW, that set lasted through the mid '90's seeing heavy use. The CRT finally got too dim to make a decent picture.
|
The ones that don't have an AV or MENU button on the front panel are worse. I've scrapped a few sets that were working fine, but without the remote it was impossible to tune them in or select the AV input (which is all a lot of people use now anyway). It's a real pain going through 10 different universal remotes and then sorting through several boxes of assorted orphan remotes and finding nothing that even sort of works.
Sometimes you can get lucky and there will be pads on the PCB for the missing AV/MENU buttons, so you can install the missing buttons.
On a couple of sets I've hardwired the relevant pin on the jungle IC to force it to AV, but that only works when you can find a datasheet and it isn't something that uses i2c for everything.
I've got one recent set sitting here right now that is close to being scrap because there is a corrupt byte in it's EEPROM. The V-size setting is wrong, but I can't get into the service menu to change it as I don't have a remote and I don't know who actually made it to even try and search for the service manual (it's one of those off brands). I swapped out the EEPROM for one on a similar chassis and the vertical size is fine, but as it's from a set with a different revision MCU the menus are corrupt.
So now I know there's no fault in the vertical section, but I can't do anything about it. I miss trimpots. Sure, they cost a few cents more, but they are a lot easier to deal with.
Maybe I'll install a v-size pot instead of scrapping this one.