Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 12-20-2007, 02:24 PM
skippy_ps's Avatar
skippy_ps skippy_ps is offline
MR-77
 
Join Date: Jan 2005
Location: Palm Springs, CA
Posts: 37
Well, I put axial caps underneath the chassis to replace the multi-section cap and put 1N4007 in place of the selenium. I did check the B+ voltage (right after the 22 ohm 1 watt resistor) before changing and got 102v there with 117 ac on the variac.

After pulling the selenium, I was getting about 145v for B+, using a 33 ohm resistor in place of the 22 ohm, with way less than 117v ac input (maybe about 105v). So I stopped there thinking that the B+ should be in the area of 102v. Just got the Sams for this radio today and it should be 140v.

So, it would seem that the selenium was way off and needed to be changed. I'll see if I can get closer to the correct B+ value by changing the resistor.

Murray

Edit: Here's a pic of the new filter caps and the diode. I drilled and tapped the chassis for #6 screws to mount 2 terminal strips and used the existing screw hole to mount the new diode. Right now, there's a 1/2 watt 33 ohm "power resistor" mounted but I'll change that to something more suitable now that I've got some new parts.
Attached Images
File Type: jpg filter caps.jpg (150.8 KB, 31 views)
__________________
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:18 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.